Process

Clean it with Passion

Step 1

We start thoroughly cleaning the main hole and surroundings which is usually full of dirt, mud and algae.

Step 2

Removal of all stale water by using submersible pump.

Step 3

The sludge which has settled on the floor of the tank is sucked out by using our sludge pump. This pump disposes off dirty sludge to any convenient and safe place outside the water tank. This type of sludge removal is a very tedious and laborious process if done manually, unbelievably but true.

Step 4

We wash algae and dirt by using 100-120 bar rotary jet pressure machine. By using this machine we clean walls and ceiling of water tanks which dislodges the layers and layers of dirt and algae which stick on the wall and ceiling of the tank

Step 5

The floor of tank is thoroughly cleaned by high pressure jet gun removing all the remaining dirt and algae. Remaining sludge is removed by using industrial vacuum cleaner making the tank absolutely dirt free.

Step 6

The most important stage of antibacterial treatment is by using antibacterial spray by which walls and ceilings are made totally sterilize from bacteria attack.The antibacterial agent is thoroughly sprayed in all the nooks and corners of the tank ensure totally sterilization of tank.

Step 7

Final sterilization and disinfection is done by using UV radiation which is used to deactivate any suspended or floating bacteria remaining in the tank.